Page 3 of 9
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 8:22 am
by kingarthur
chrisdec wrote: ↑Sat Dec 22, 2018 8:15 am
kingarthur wrote: ↑Sat Dec 22, 2018 8:06 am
1.go to the downloads page
2.on the top right side on the same line as latest version is an orange edit button click that.
3. at the bottom of that page is a gray box that says select a zipped mod to upload. click that , find your mod.
4. click the submit button on the bottom right after the blue bar fills and the box show a green check mark
it worked
my very first mod adaptation works
no icons yet butt its working
Cool. If u have anymore issues feel free to shoot me a pm
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 11:10 am
by chrisdec
kingarthur wrote: ↑Sat Dec 22, 2018 8:22 am
chrisdec wrote: ↑Sat Dec 22, 2018 8:15 am
kingarthur wrote: ↑Sat Dec 22, 2018 8:06 am
1.go to the downloads page
2.on the top right side on the same line as latest version is an orange edit button click that.
3. at the bottom of that page is a gray box that says select a zipped mod to upload. click that , find your mod.
4. click the submit button on the bottom right after the blue bar fills and the box show a green check mark
it worked
my very first mod adaptation works
no icons yet butt its working
Cool. If u have anymore issues feel free to shoot me a pm
thanks i sure will do
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 11:16 am
by chrisdec
ShinoHarvest wrote: ↑Wed Nov 14, 2018 10:57 am
posible add all electronic part resistor 1, 2, 3, inductor..., cpacitor, optical fiber ... because craft is to complex for make it in single point
i'll have a look at it but for the moment im not at home
but sure will put it in the list off stacking
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 12:38 pm
by The_Ghost
chrisdec wrote: ↑Sat Dec 22, 2018 11:16 am
it worked
my very first mod adaptation works
no icons yet butt its working
Congratultions!
You are able to test your mods without uploading them to the mod portal. Just take the folder containg the mods files uncompressed to your factorio mod directory. It will load as if you would have downloaded this same mod from the portal. In this case you don't need to repackage and upload for every forgotten comma
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 1:24 pm
by chrisdec
The_Ghost wrote: ↑Sat Dec 22, 2018 12:38 pm
chrisdec wrote: ↑Sat Dec 22, 2018 11:16 am
it worked
my very first mod adaptation works
no icons yet butt its working
Congratultions!
You are able to test your mods without uploading them to the mod portal. Just take the folder containg the mods files uncompressed to your factorio mod directory. It will load as if you would have downloaded this same mod from the portal. In this case you don't need to repackage and upload for every forgotten comma
well yes i wanted to give the others a chance to test it out also
i hope you are okay with this me updating the mod as you dont have time for it
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 1:45 pm
by The_Ghost
chrisdec wrote: ↑Sat Dec 22, 2018 1:24 pm
well yes i wanted to give the others a chance to test it out also
i hope you are okay with this me updating the mod as you dont have time for it
Of course its okay. The mod is on github as an open source project to enable others, like you, to apply their own changes. But in the long run i would prefer to have a single version in the mod portal to prevent confusion for mod users which version to use. As long as you keep this in mind just continue. I do appreciate it!
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 1:50 pm
by chrisdec
The_Ghost wrote: ↑Sat Dec 22, 2018 1:45 pm
chrisdec wrote: ↑Sat Dec 22, 2018 1:24 pm
well yes i wanted to give the others a chance to test it out also
i hope you are okay with this me updating the mod as you dont have time for it
Of course its okay. The mod is on github as an open source project to enable others, like you, to apply their own changes. But in the long run i would prefer to have a single version in the mod portal to prevent confusion for mod users which version to use. As long as you keep this in mind just continue. I do appreciate it!
yes just wanted to continue update this mod
the only thing i would like to know how to do icons
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 5:50 pm
by chrisdec
new version for testing is out,
changelog:0.2.2
added sand,pure sand and capacitor 1
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sat Dec 22, 2018 6:13 pm
by chrisdec
chrisdec wrote: ↑Sat Dec 22, 2018 5:50 pm
new version for testing is out,
changelog:0.2.2
added sand,pure sand and capacitor 1
i can't get capacitor 1 stacked maybe something wrong in the coding?
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sun Dec 23, 2018 3:48 am
by kingarthur
chrisdec wrote: ↑Sat Dec 22, 2018 6:13 pm
chrisdec wrote: ↑Sat Dec 22, 2018 5:50 pm
new version for testing is out,
changelog:0.2.2
added sand,pure sand and capacitor 1
i can't get capacitor 1 stacked maybe something wrong in the coding?
thats cause you named it wrong. pyht cap 1 is (capacitor1) not capacitor-1
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sun Dec 23, 2018 5:33 am
by chrisdec
kingarthur wrote: ↑Sun Dec 23, 2018 3:48 am
chrisdec wrote: ↑Sat Dec 22, 2018 6:13 pm
chrisdec wrote: ↑Sat Dec 22, 2018 5:50 pm
new version for testing is out,
changelog:0.2.2
added sand,pure sand and capacitor 1
i can't get capacitor 1 stacked maybe something wrong in the coding?
thats cause you named it wrong. pyht cap 1 is (capacitor1) not capacitor-1
yeah discovered it out to, this wil be fixed in a new version
also i have been in contact with the original uploader
he said his mod will be updated soon
so on my end i will do my best to maintain and help him with the mod
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sun Dec 23, 2018 5:37 am
by chrisdec
a question to everyone who is using deadlock's stacking for pyanodon
do we need to add every ore and plate from the new raw ores mod into deadlock's stacking?
Re: Deadlocks Stacking for Pyanodons mods
Posted: Sun Dec 23, 2018 7:09 am
by chrisdec
new version available,
changelog:
0.2.5
miner coding changes to make capacitor 1 stackable
now with soil,glass,sand,pure sand and capacitor 1
Re: Deadlocks Stacking for Pyanodons mods
Posted: Mon Dec 24, 2018 4:53 pm
by chrisdec
tomorrow i will release a new version
with all the requested things
since it's Christmas Eve here in belgium
have a Merry Christmas everyone
Re: Deadlocks Stacking for Pyanodons mods
Posted: Tue Dec 25, 2018 8:38 am
by chrisdec
hey everyone,
merry christmas
new version avaible,
changelog: 0.2.6
added to stacking
resistor 1,2,3
capacitor 2,3
inductor 1,2,3
optical fiber
(will soon be adding al the stuff for Py Raw Ores)
Re: Deadlocks Stacking for Pyanodons mods
Posted: Fri Dec 28, 2018 1:14 pm
by chrisdec
new version aviable,
changelog: 0.2.7
added to stacking
for
py coal processing:
nexelit plate, chromium
for
py raw ores:
aluminium plate, nickel plate, tin plate,
lead plate, titanium plate, zinc plate,
duralumin, silver plate, super steel,
stainless steel, tinned cable and solder
please go grab it
enjoy
any other's i forgot let me know
Re: Deadlocks Stacking for Pyanodons mods
Posted: Fri Dec 28, 2018 1:17 pm
by chrisdec
i am trying to figure out what ive missed
Re: Deadlocks Stacking for Pyanodons mods
Posted: Fri Dec 28, 2018 1:32 pm
by chrisdec
chrisdec wrote: ↑Fri Dec 28, 2018 1:17 pm
i am trying to figure out what ive missed
mod not working curently working on a solution
Re: Deadlocks Stacking for Pyanodons mods
Posted: Fri Dec 28, 2018 1:40 pm
by chrisdec
sorry for the trouble im making so many updates now
it seems there's something wrong in my coding
Re: Deadlocks Stacking for Pyanodons mods
Posted: Fri Dec 28, 2018 1:57 pm
by chrisdec
the mod is working again,
sorry for this but i had to remove all the things ive added
i will try it with less things so i can track down what i did wrong