Try it, there's a save. This can drain the buffer chests faster than trains can load them. That screenshot is of the gap between train arrivals, it closes up quite a lot because those are red belts on the right, The only tuning left is getting the interarrival times down, switching to single-wagon nuclear-fueled trains and circuit-controlled entry timing I can get it to 117 ticks, 150 ticks for two wagons, that works out to exactly a 52-item gap for one-wagon trains, 66⅔ for two.eradicator wrote:what does sideloading onto a splitter achieve there?
[Experiment] Unloading 4 compressed blue belts per wagon.
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
This shows the effect the compressors get, right side is take it as it comes, left side has the compress-what-you-can machinery.
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Lets do 3 belts per side (drawback: 2 cargo wagons max)
With balancer or full throughput: balanced unloading.
With balancer or full throughput: balanced unloading.
- dingdong3.gif (6.34 MiB) Viewed 8736 times
BluePrint
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
And to satisfy requirements of your original post:
- dingdong4.gif (4.64 MiB) Viewed 8726 times
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
But what would be the point of that many belts?
You can only move items that fast between train and chests and a train is only there part of the time. If you manage to have a train in station 50% of the time then your belts should be half the speed of the train/chest speed.
You can only move items that fast between train and chests and a train is only there part of the time. If you manage to have a train in station 50% of the time then your belts should be half the speed of the train/chest speed.
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
With the fastest interarrival times I can get there's 117 ticks between trains, where the buffer chests aren't being loaded. That's time for 54 items to unload. For ore it's 167 items to unload per buffer so you've got 66% busy already; for chips it's 667 items/buffer so 93% busy. 93% busy is just about perfect. 100% compression in the supply belts means you don't have enough supply belts (and production capacity using your supply). Whatever's busiest, build more of it. You want to be able to compress belts, or anyway get close, but permanently stuffed buffers and belts are a disease symptom.
-
eradicator
- Smart Inserter
- Posts: 5207
- Joined: Tue Jul 12, 2016 9:03 am
- Contact:
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Can't try it right now. But @disentius'es video already proves that you can just use a normal belt instead of unloading to a splitter, because the splitter in that case doesn't do anything. And regarding optimization potential...you said yourself that the output belts are red belts. So there's most definetly room for space-optimization.quyxkh wrote:Try it, there's a save. This can drain the buffer chests faster than trains can load them. That screenshot is of the gap between train arrivals, it closes up quite a lot because those are red belts on the right, The only tuning left is getting the interarrival times down, switching to single-wagon nuclear-fueled trains and circuit-controlled entry timing I can get it to 117 ticks, 150 ticks for two wagons, that works out to exactly a 52-item gap for one-wagon trains, 66⅔ for two.eradicator wrote:what does sideloading onto a splitter achieve there?
@disentius: Nice built. Now you just need to add symmetry :P
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Unloading onto splitters can change the side of the belt the items land on. Not sure if that is the case here.eradicator wrote:Can't try it right now. But @disentius'es video already proves that you can just use a normal belt instead of unloading to a splitter, because the splitter in that case doesn't do anything. And regarding optimization potential...you said yourself that the output belts are red belts. So there's most definetly room for space-optimization.quyxkh wrote:Try it, there's a save. This can drain the buffer chests faster than trains can load them. That screenshot is of the gap between train arrivals, it closes up quite a lot because those are red belts on the right, The only tuning left is getting the interarrival times down, switching to single-wagon nuclear-fueled trains and circuit-controlled entry timing I can get it to 117 ticks, 150 ticks for two wagons, that works out to exactly a 52-item gap for one-wagon trains, 66⅔ for two.eradicator wrote:what does sideloading onto a splitter achieve there?
@disentius: Nice built. Now you just need to add symmetry
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
I'm not sure what you are calculating there. Unless you unload artillery shells (or rocket silosquyxkh wrote:With the fastest interarrival times I can get there's 117 ticks between trains, where the buffer chests aren't being loaded. That's time for 54 items to unload. For ore it's 167 items to unload per buffer so you've got 66% busy already; for chips it's 667 items/buffer so 93% busy. 93% busy is just about perfect. 100% compression in the supply belts means you don't have enough supply belts (and production capacity using your supply). Whatever's busiest, build more of it. You want to be able to compress belts, or anyway get close, but permanently stuffed buffers and belts are a disease symptom.
you will always load/unload the same number of items in 117 ticks. But the point was you aren't unloading in those 117 ticks. The question is then how much time do you spend loading/unloading the train, which depends on the stack size. Utilization is then <time to unload> / (<time to unload> + 117). But you won't get 117 ticks between trains in a real life situation. One red signals anywhere along the track and you get a bigger gap. Such tight schedules only work on dedicated lines.Re: [Experiment] Unloading 4 compressed blue belts per wagon.
@eradicator:
yeah... there go goes my social life this evening
yeah... there go goes my social life this evening
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Perhaps I'm missing your point, you keep saying that. What I've been trying to point out is, with the splitter unloading never falls behind -- as you already know, without the splitter unloading falls behind by several per second. For chips that makes unloading the bottleneck. With the splitter, no bottleneck. Is there something else you're trying to say there?eradicator wrote:the splitter in that case doesn't do anything
blueprint
@mrvn: I think you forgot about stackers, and pace a typo (busy % is unload time / (
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
First iteration:
That is a nice bug/feature, unloading to splitters actually goes faster than unloading to belts.
LesseeWhatWeCanDoWithThat...
[UPDATE:} nothing much in this quest. the output per splitter rises to about 17items/sec but unloading space per inserter is doubled (1->2 tiles)
- dingdong5.gif (14.77 MiB) Viewed 8675 times
BluePrint
@Q:That is a nice bug/feature, unloading to splitters actually goes faster than unloading to belts.
LesseeWhatWeCanDoWithThat...
[UPDATE:} nothing much in this quest. the output per splitter rises to about 17items/sec but unloading space per inserter is doubled (1->2 tiles)
-
eradicator
- Smart Inserter
- Posts: 5207
- Joined: Tue Jul 12, 2016 9:03 am
- Contact:
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
@quyxkh:
That video explains it. I wasn't aware that inserting onto splitters is that much faster. Though as that makes the belt unbalanced and requires rebalancing i don't think it's worth it for that tiny boost.
@disentius:
That looks much nicer. Though also much more similar to my original designs :D. Also i noticed you still have an unfullfilled condition:
That video explains it. I wasn't aware that inserting onto splitters is that much faster. Though as that makes the belt unbalanced and requires rebalancing i don't think it's worth it for that tiny boost.
@disentius:
That looks much nicer. Though also much more similar to my original designs :D. Also i noticed you still have an unfullfilled condition:
eradicator wrote: Must provide a way to tunnel at least one belt [of unrelated items] per wagon to the other side of the track. (Doesn't have to be a full free row, undergrounds are fine)
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
This one fails your requirements 2,3 and 4
Biggest difference is that mine does balanced unloading, with full throughput/always with a balancer attached
Well... you cannot have a cake and eat it.
Welcome to everlasting battle between esthetics, functionality, and usability.
(to say nothing of blueprintability or factorioability)
Biggest difference is that mine does balanced unloading, with full throughput/always with a balancer attached
Well... you cannot have a cake and eat it.
Welcome to everlasting battle between esthetics, functionality, and usability.
(to say nothing of blueprintability or factorioability)
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
- 6 Compressed belts/wagon Edit: Sorry, I thought stack inserter throughput with splitter hack was twice what it would be to a belt. It is not. This design does not produce compressed belts in practice.
- All original chests are drawn from equally and are lane balanced
- Looks like a spaceship
Last edited by Slayn25 on Sun May 20, 2018 12:30 am, edited 1 time in total.
-
Demosthenex
- Fast Inserter
- Posts: 144
- Joined: Mon Mar 14, 2016 3:51 pm
- Contact:
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Just... wow.Slayn25 wrote:
- 6 Compressed belts/wagon
- All original chests are drawn from equally and are lane balanced
- Looks like a spaceship
Now can you load 6 per wagon?
-
zOldBulldog
- Smart Inserter
- Posts: 1161
- Joined: Sat Mar 17, 2018 1:20 pm
- Contact:
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
I read the thread and I see a lot of argument and theory but no clear agreement. Or am I reading it wrong.
To help bring some focus to the thread I have two questions:
1) Which of all of the designs have been *tested* to successfully saturate 4 unloaded belts per wagon?
2) Of those that were successful at (1), which is the most compact?
As to being able to move a train into position fast enough I don't see that being a problem, at least for 1-2 trains. I think I have a station/stacker design that seems to do that (and even faster). I am just missing the right unloaded (my current one almost saturates 3 belts
).
To help bring some focus to the thread I have two questions:
1) Which of all of the designs have been *tested* to successfully saturate 4 unloaded belts per wagon?
2) Of those that were successful at (1), which is the most compact?
As to being able to move a train into position fast enough I don't see that being a problem, at least for 1-2 trains. I think I have a station/stacker design that seems to do that (and even faster). I am just missing the right unloaded (my current one almost saturates 3 belts
).Re: [Experiment] Unloading 4 compressed blue belts per wagon.
Blueprint String:
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
@Slayn:
Arkanoids! spaceship indeed
Beautiful, has 2 problems:
- Not extensible beyond 4 wagons
- Not enough throughput chest->inserter->belt*
*to get > 3 blue belts per wagon, you need more than 1 inserter per chest, and 12 chests per wagon.
see the OP
@zOldBulldog: DaveMcW's is brilliant, and the most efficient for 4 belts per wagon
Every design has its own pros and cons; balancing, unwieldy, asymetric, UPS intensive. wagon-limited, BIG. They do work most of the time, check the post.
And you can test the blueprinted ones yourself
After the first page it became an academic exercise, see OP.
[edit] typo
Arkanoids! spaceship indeed
Beautiful, has 2 problems:
- Not extensible beyond 4 wagons
- Not enough throughput chest->inserter->belt*
*to get > 3 blue belts per wagon, you need more than 1 inserter per chest, and 12 chests per wagon.
see the OP
@zOldBulldog: DaveMcW's is brilliant, and the most efficient for 4 belts per wagon
Every design has its own pros and cons; balancing, unwieldy, asymetric, UPS intensive. wagon-limited, BIG. They do work most of the time, check the post.
And you can test the blueprinted ones yourself
After the first page it became an academic exercise, see OP.
[edit] typo
Re: [Experiment] Unloading 4 compressed blue belts per wagon.
1. If your train is longer than 4 wagons, getting it in and out of the station before your 6 belts empty the buffer is a bigger problem.disentius wrote:@Slayn:
- Not extensible beyond 4 wagons
- Not enough throughput chest->inserter->belt*
2. Outputting to a splitter doubles inserter throughput.