[0.12] Bugs, crashes & other issues

Choumiko · Post by **Choumiko** » Fri Apr 05, 2019 8:12 pm

Thanks for the report, should be fixed in the latest update

bernd · Post by **bernd** » Sat Apr 06, 2019 3:10 pm

Thanks for the fix, now it works again.

Ghoulish · Post by **Ghoulish** » Sat May 18, 2019 5:55 am

Hi Choumiko,

I have a MOD which adds a light to big electric poles, when I try and create a FARL blueprint using this pole I get the error shown below. FARL does go onto work and lay track to the configuration specified, just with normal big electric poles, no lights (even though I don't have any such poles on the train).

: Untitled.png (839.54 KiB) Viewed 8989 times

Thank you very much for FARL

Choumiko · Post by **Choumiko** » Sat May 18, 2019 6:49 am

I reported it to https://mods.factorio.com/mod/LightedPo ... 000b88b701 (i guess that's the mod you are using)

FARL doesn't place normal big electric poles, those are the modded ones (hence the unknown key), they just are exact copies of the normal big poles and have a invisible lamp placed normally. The unknown key error will be fixed in a future update, but that is just cosmetic and shouldn't affect it working or not.

Ghoulish · Post by **Ghoulish** » Sat May 18, 2019 10:19 am

Choumiko wrote: ↑Sat May 18, 2019 6:49 am I reported it to [SNIP]

Thank you once again Choumiko

Ghoulish · Post by **Ghoulish** » Sun Jul 28, 2019 1:25 am

Am getting an error when I try to read a couple of FARL blueprints.

: 111.png (614.51 KiB) Viewed 8835 times

I enclosed the 2 blueprints, just in case the error is my end, and I created a blueprint with an incorrect layout.

Choumiko · Post by **Choumiko** » Sun Jul 28, 2019 5:17 am

Should be fixed in the latest update.

Are you sure you want only half of the lanes with signals? (That's what caused the error, but it should still have read the blueprint fine)

Ghoulish · Post by **Ghoulish** » Sun Jul 28, 2019 1:16 pm

Choumiko wrote: ↑Sun Jul 28, 2019 5:17 am Should be fixed in the latest update.

Are you sure you want only half of the lanes with signals? (That's what caused the error, but it should still have read the blueprint fine)

Probably not! It wouldn't be much of an upgrade, that's for sure. Thanks for the fix.

leitk · Post by **leitk** » Thu Oct 31, 2019 2:00 am

I'm trying to use FARL with SE. SE has 'Space Rails' that can be placed in space.
In the setting page of FARL, it recognizes 'Space Rails'. But when I press start, it gives the error message 'Out of Rail'.
It does mark 'CP', 'P', and 'Front' on the screen.

I've loaded blueprints with 'Space rails'. That seemed to work without a problem.

What needs to be set (or not set) to get FARL to recognize the 'Space Rails in the cargo car? The engine and cargo car are both standard.

CheeseMcBurger · Post by **CheeseMcBurger** » Tue Dec 24, 2019 10:46 pm

Version 3.1.15

Constructed rail, pole and signal is different than in the blueprint.

leitk · Post by **leitk** » Thu Jan 23, 2020 2:05 pm

CheeseMcBurger wrote: ↑Tue Dec 24, 2019 10:46 pm Version 3.1.15

Constructed rail, pole and signal is different than in the blueprint.

WAD (Works As Designed): signals are placed by the gap between them in the rails as defined in the settings page, poles are placed by wire length. You may be able to get them to line up by setting the signal gap to match wire length, but that's probably not worth it.

burninghey · Post by **burninghey** » Tue Jan 28, 2020 3:47 pm

can't build signals the direction i want to ... did a bug report, but maybe it's FARL related?

viewtopic.php?p=475976

: 20200128161017_1.jpg (464.73 KiB) Viewed 8286 times

leitk · Post by **leitk** » Thu Feb 27, 2020 3:56 am

leitk wrote: ↑Thu Oct 31, 2019 2:00 am I'm trying to use FARL with SE. SE has 'Space Rails' that can be placed in space.

It now works with Space Exploration. As far as I know there were no changes to SE nor FARL to make this work.
There have been several base updates perhaps one of them fixed it.
Or perhaps I was mistaken somewhere.

In any case, no need to look into this.

McDuff · Post by **McDuff** » Tue Mar 03, 2020 12:26 am

I have an issue with rail signals only being placed on the rail I'm driving on. This happens on vertical and horizontal, but not diagonal rails, where signals are placed just fine. The rails are placed down, but I only get signals on one rail - this is true for 2 lane and 4 lane blueprints I've tried.

Choumiko · Post by **Choumiko** » Thu Mar 05, 2020 11:00 am

Blueprint strings, Mod version and Factorio version please.

McDuff · Post by **McDuff** » Fri Mar 06, 2020 11:12 am

Blueprint string for 2 lane:

0eNqVkt2KgzAQhd9lrpOircY2r7IsJdrBDsQoMV1WJO/eGJfS0hTWu/ydb+aczAy1vuFgyTiQM1DTmxHk1wwjtUbp5cxNA4IEctgBA6O6ZWcVafAMyFzwF2TuvxmgceQIV33cTGdz62q04cFDObqgba+ORwSDoR+DqjdLqUAqGEwg996zN8b+vwwuPkMOLxZ4c1Vk+J/ZN1C5KyOJZ7symL2QxWa9LhLoYpvHLNVe+WDU1HLUoZ6lhg+9xoTPfO0uT5HExrSS7VSvaX3KiVfPQSU4x23R8OTXnTY6WihhLOPgyqc5Z6BVjWG2ISx/0I5RWVWHPMuEEMeT93dprgQR

Blueprint for 4 lane:

0eNqVld1uhCAQRt9lrmEj/surNE2jLnFJFA2yTY3h3YvabHazkDp3Is7hy5mJrND0dzFpqQzwFWQ7qhn4xwqz7FTdb+/MMgngII0YgICqh22la9mDJSDVVfwAZ/aTgFBGGimO+n2xfKn70AjtPnhUzsbVdjdDdwSBaZxd1ai2ozZSRGABHltL3iDxWUgaZiRnGTQPQ9LTEBaHKdmLTfpn/N0Iu2Q7hEaXzCm/Si3aYz/1UHOk6cgXrXiN1t5qqYIBM1S+EtdEb7zqwWhkR0XvztOypdPYC18PjnTMR9okoObBm4exc62kxbMqHyjGTpY/T3IyD0v+C5Qix4l6R51luK4HKDmyWQFMgZUc4JRYN6kXUyHdeCkxdpADGIZ24zju579fD/zpNiHQ141wNwi4x2+h5720KBIWRXmel5W1v5AsH9E=

Factorio 18.10
Farl 4.0.1

I've tried lots of things - changing orientation, changing which track the signal gets put on, etc.

Choumiko · Post by **Choumiko** » Fri Mar 06, 2020 11:56 am

Just remove the rails in the blueprint that don't have a signal.

Fixed string for the 2 lane:

Demosthenex · Post by **Demosthenex** » Mon Mar 09, 2020 12:09 pm

Factorio 0.18.10, FARL 4.0.1 with Pyanodons: Small electrical poles placed too far apart

Using FARL with small electric poles, they are always placed with a warning about unconnected poles. They are disconnected, meaning I have to run power manually. Maybe an off by one error, or changes to wire length?

Attempts to use blueprints to control spacing have been mixed, typically spamming many more poles than needed but at least they are connected.

Complete modlist:

Modlist

McDuff · Post by **McDuff** » Fri Apr 10, 2020 8:03 pm

Choumiko wrote: ↑Fri Mar 06, 2020 11:56 am Just remove the rails in the blueprint that don't have a signal.

Fixed string for the 2 lane:
0eNqNkd2OwiAQhd9lrsHUtT8ur2LMhtZJnYROG0CzTcO7L+DGaKqJVzBw5mMOZ4HWXHCyxB7UAtSN7EAdFnDUszbpzM8TggLyOIAA1kOqrCYDQQDxCX9BbcNRALInT3jrz8X8w5ehRRsF986WeokGO2+pk9NoMEKn0cXOkdNzkSajek5LCGJF+nqaQf7PuWY0m+pGKTbVK87uznE+kvqzl9nUmlRnTvEKUn4KKd8zqmdD3VkTv7VVPboScCIbfzJflymCHJJ6yFSA0S3GHCFur2hd1jbNblsUdV3vv0P4A3uGqFA=

Thanks for this, so is it the case that each direction in a blueprint should only use one piece of rail?

Choumiko · Post by **Choumiko** » Wed Apr 15, 2020 8:21 am

I think so yes. But i also think i might have a few lines of code that should try to eliminate rails if they are connected to another rail that has a signal?
Not sure anymore, except that if you use only 1 piece of rail per lane everything should always work.

Factorio Forums

[0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues

Re: [0.12] Bugs, crashes & other issues