[0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Moderator: bobingabout
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Thus I need blue science to upgrade chemical mixers to electro-chemical or multi-purpose.
Thank you for letting me know, I use factorio.rotol.me and the current recipe listed on the site requires the chemical furnace.
Thank you for letting me know, I use factorio.rotol.me and the current recipe listed on the site requires the chemical furnace.
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Hello Bob,
maybe you can implement this fix permanently: viewtopic.php?f=51&t=32503#p229721 ?
Greetings steinio
maybe you can implement this fix permanently: viewtopic.php?f=51&t=32503#p229721 ?
Greetings steinio
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
I just got to the point in my build where I noticed that the Electrolyser 3 requires tungsten, where the Electrolyser 2 is just steel and electronic circuit boards. The pattern so far has been that the Mk3 items require titanium and Mk4 requires tungsten.
This creates an awkward situation when pairing electrolysers with chemical plants of the same tier. For someone with a titanium but not tungsten setup, you can make the Mk3 chemical plants but only the Mk2 electrolysers.
This creates an awkward situation when pairing electrolysers with chemical plants of the same tier. For someone with a titanium but not tungsten setup, you can make the Mk3 chemical plants but only the Mk2 electrolysers.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
actually, the pattern is different between different factories. Most of them go Iron-Steel-Titanium-Nitinol. No tungsten required at all. Another often used chain goes Iron-Invar-Tungsten-Tunsten alloy.
however, both of these are 4 step, the true chain is 5 step, it's just rarely used.
Iron -> Steel -> Invar/Brass/Aluminium -> Titanium/Tungsten -> Titanium/Tungsten Alloy (Nitinol, Copper tungsten or Tungsten carbide)
There are a few other variations too, such as those using stone and ceramics, or copper and copper alloys, or even Cobalt. But the main two chains are as mentioned above, starting with iron and iron alloys, and going up to either titanium, or tungsten, both of which are a T4 metal (T4 on my chart is defined as requiring science pack 3)
however, both of these are 4 step, the true chain is 5 step, it's just rarely used.
Iron -> Steel -> Invar/Brass/Aluminium -> Titanium/Tungsten -> Titanium/Tungsten Alloy (Nitinol, Copper tungsten or Tungsten carbide)
There are a few other variations too, such as those using stone and ceramics, or copper and copper alloys, or even Cobalt. But the main two chains are as mentioned above, starting with iron and iron alloys, and going up to either titanium, or tungsten, both of which are a T4 metal (T4 on my chart is defined as requiring science pack 3)
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
With the gas venting pump, is it not able to be connected to the circuit network? I'd like to vent excess gas, but I'm not sure how this is usually done. Venting drains EVERYTHING on the line. But I'm wanting to build a large water electrolysis area and put both hydrogen and oxygen on the bus. Each would be used at variable rates, but I don't want production stalled if there's a backup of one or the other. So venting is important. But venting only seems to work if you want to totally not use one of the outputs. How can I supply BOTH hydrogen and oxygen for general use?
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Put a regular pump in front of the vent, wire the pump to a storage tank. Set the pump to anything > 2000 (or any value less than the max for the tank).Recon777 wrote:With the gas venting pump, is it not able to be connected to the circuit network? I'd like to vent excess gas, but I'm not sure how this is usually done. Venting drains EVERYTHING on the line. But I'm wanting to build a large water electrolysis area and put both hydrogen and oxygen on the bus. Each would be used at variable rates, but I don't want production stalled if there's a backup of one or the other. So venting is important. But venting only seems to work if you want to totally not use one of the outputs. How can I supply BOTH hydrogen and oxygen for general use?
Alternatively you can add the flow control mod and use the overflow valve
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Oooh, a pump before the vent. Brilliant. Thanks.
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
I have hit another snag in my production line.
Or is there something I need to process it?
Or should I change the LUA files?
I am using Bobs mods updated to 0.14.0 (plates, ores, etc.)
Also a few above such as library 14.3, Warfare 0.14.3, boblogistics 14.5 and etc.
The electrolyzer is not accepting "item.name.silicon-ore" Is there another ore called Quartz (silicon Ore)?Or is there something I need to process it?
Or should I change the LUA files?
I am using Bobs mods updated to 0.14.0 (plates, ores, etc.)
Also a few above such as library 14.3, Warfare 0.14.3, boblogistics 14.5 and etc.
- Attachments
-
- Item.Name Silicon Ore.jpg (702.71 KiB) Viewed 7759 times
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Reply is on screenshot you posted.
Quartz you have is from Beyond mod so it's a different quartz then the one needed by recipe. You need to find bob's quartz and it will work then.
Quartz you have is from Beyond mod so it's a different quartz then the one needed by recipe. You need to find bob's quartz and it will work then.
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
That worked!orzelek wrote:Reply is on screenshot you posted.
Quartz you have is from Beyond mod so it's a different quartz then the one needed by recipe. You need to find bob's quartz and it will work then.
Whats weird is the beyond mod quartz can make glass but not silicon wafers (or silicon plate)
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
The reason my item is named "Quartz (Silicon ore)" is because the item is actually "quartz" internally, and used to be named just as "Quartz". But since, actually quite early on in the tree, things start to require the metal "Silicon", people were asking "Where do I get Silicon ore?". Well, the answer was "It's Quartz", which confused people who didn't realise that Quartz is a silica-oxide crystal.
Couple that with Galena (Which is actually internally named as "lead-ore"), Bauxite and Rutile, and people were finding it difficult to associate an ore with the metal you get from it. So all the ores that were not named "Metal ore", where renamed to "Name (Metal Ore)", This allowed them to keep their technical name, but made it obvious what metal you get from them. The only exception to that rule is that Cobalt ore is still named Cobaltite, because, hopefully, that one is obvious. Also, by default you'll never find it in the game, because you're expected to reduce Cobalt Oxide from Copper in the advanced copper processing recipe.
If other people add ores that use names differently than me (Which if they stick to the "metal-ore" system, should only be an issue with Quartz, Aluminium and Titanium) then that's not my fault.
To note: Why do Quartz, Bauxite and Rutile not conform to "metal-ore" like everything else? Simple. At the time, the "Big mods" in play were DyTech and FMod. Both mods added ores, some where common to both mods, but Cassiterite, Bauxite and Rutile were in FMod that weren't in DyTech. Cassiterite is Tin ore, was also in DyTech, so I opted to go with the more conventional tin-ore name, but kept the other real world names for the other two. Quartz was one of my first unique ores to enter the game, which was basically my alternative to DyTech's Sand. Neither of which had a "metal-ore" name(in DyTech, it wasn't used to obtain a metal, so makes more sense there than my use case). Also why "Silicon" instead of "silicon-plate" internally? again, I found other mods using silicon, and was requested to have compatibility between them, simple solution is to use the same item names they did.
Anyway, if they have a "Silicon ore" item, I can understand where the confusion arises if it can't actually be used to make silicon metal.
Couple that with Galena (Which is actually internally named as "lead-ore"), Bauxite and Rutile, and people were finding it difficult to associate an ore with the metal you get from it. So all the ores that were not named "Metal ore", where renamed to "Name (Metal Ore)", This allowed them to keep their technical name, but made it obvious what metal you get from them. The only exception to that rule is that Cobalt ore is still named Cobaltite, because, hopefully, that one is obvious. Also, by default you'll never find it in the game, because you're expected to reduce Cobalt Oxide from Copper in the advanced copper processing recipe.
If other people add ores that use names differently than me (Which if they stick to the "metal-ore" system, should only be an issue with Quartz, Aluminium and Titanium) then that's not my fault.
To note: Why do Quartz, Bauxite and Rutile not conform to "metal-ore" like everything else? Simple. At the time, the "Big mods" in play were DyTech and FMod. Both mods added ores, some where common to both mods, but Cassiterite, Bauxite and Rutile were in FMod that weren't in DyTech. Cassiterite is Tin ore, was also in DyTech, so I opted to go with the more conventional tin-ore name, but kept the other real world names for the other two. Quartz was one of my first unique ores to enter the game, which was basically my alternative to DyTech's Sand. Neither of which had a "metal-ore" name(in DyTech, it wasn't used to obtain a metal, so makes more sense there than my use case). Also why "Silicon" instead of "silicon-plate" internally? again, I found other mods using silicon, and was requested to have compatibility between them, simple solution is to use the same item names they did.
Anyway, if they have a "Silicon ore" item, I can understand where the confusion arises if it can't actually be used to make silicon metal.
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
new resources and recipes adds?
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Maybe I am missing something, but I'm trying to setup a mega bob's base, and there appears to be no barreling or bottling of sulfur dioxide. Any suggestions here?
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
It's one I missed, probably for some reason that I've forgot.
you could Vent it, or presuming you actually want the gas, convert it into the desired product first, EG, Sulfur (Which is a solid and doesn't need barrelling) or Sulfuric Acid (Which can be barrelled).
IF a fluid in my mod can't be bottled, or barrelled, look at the step before or after, and usually you can do something with it.
you could Vent it, or presuming you actually want the gas, convert it into the desired product first, EG, Sulfur (Which is a solid and doesn't need barrelling) or Sulfuric Acid (Which can be barrelled).
IF a fluid in my mod can't be bottled, or barrelled, look at the step before or after, and usually you can do something with it.
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
If I were to add this to your mod for my playthrough, would you consider this a gas, or fluid? (to put in a bottle, or barrel)
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Sulphur dioxide is a gas.ohmusama wrote:If I were to add this to your mod for my playthrough, would you consider this a gas, or fluid? (to put in a bottle, or barrel)
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Also missing Tungsten Acid barreling
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
The main reason why that is missing though is because that one was basically designed to go back to back with the step that comes after it. Tungstic acid is only ones for one thing, so in theory, you can process it straight into the next stage as you make it, then ship that off to make either Tungsten plates, Tungsten Carbide, or copper tungsten. I think those are the only 3 intermediates.ohmusama wrote:Also missing Tungsten Acid barreling
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
I just keep adding the recipes that are missing as I find them. Next on the list for me is nitrogen dioxide. Then I'll add the sulfer/nitric acid mixture, then glycerol, then nitroglycerin, which is a funny thing to "pipe" around let a lone put in a barrel. Maybe I'll put those in canisters.
The setup looks something like this, where the fluids are flown in by bots, and chunks of the base are disabled when not needed so no beacon drain.
The setup looks something like this, where the fluids are flown in by bots, and chunks of the base are disabled when not needed so no beacon drain.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [0.12.x][v0.12.12] Bob's Metals, Chemicals and Intermediates
Well, those that you mentioned have the gaps for the reasons I mentioned earlier.
Nitrogen Dioxide is just made by combining nitrogen and oxygen, and is only used to make nitric acid(And maybe a ceramic which was added later), all 3 of which can be put in bottles/barrels.
Sulfuric/Nitric acid mixture is a case similar to tungstic acid. It is made from Nitrogen Dioxide, and used to make Nitroglycerin, and Glycerol again only used for a single product, Nitroglycerin, which is produced from light oil(or is it heavy oil?), which again can be barrelled.
and nitroglycerin for obvious reasons, though I agree piping is a bit dumb, but you need to get it to the factory somehow.
In any case, the idea was that you're supposed to Produce nitroglycerin in a single factory block that takes in nitrogen, oxygen, light oil and sulfuric acid directly. Or compressed air instead of nitrogen, still need extra oxygen though.
Nitrogen Dioxide is just made by combining nitrogen and oxygen, and is only used to make nitric acid(And maybe a ceramic which was added later), all 3 of which can be put in bottles/barrels.
Sulfuric/Nitric acid mixture is a case similar to tungstic acid. It is made from Nitrogen Dioxide, and used to make Nitroglycerin, and Glycerol again only used for a single product, Nitroglycerin, which is produced from light oil(or is it heavy oil?), which again can be barrelled.
and nitroglycerin for obvious reasons, though I agree piping is a bit dumb, but you need to get it to the factory somehow.
In any case, the idea was that you're supposed to Produce nitroglycerin in a single factory block that takes in nitrogen, oxygen, light oil and sulfuric acid directly. Or compressed air instead of nitrogen, still need extra oxygen though.