The best place to get the required ores is from bobores mod.
https://forums.factorio.com/forum/vie ... =14&t=3797
Also, to automate all the new materials, Bob's assembly machines is required.
https://forums.factorio.com/forum/vie ... 14&p=33934
Downloads:
V0.12.x
Latest: V0.12.12 - 26th June 2016
Dropbox Latest
Archive
As of 0.12.8, the Library Mod is required.
Items sort by: Ore, Resorces, Chemical, Metal, Alloy, Electronic Part, Electronic Board, Gear, Bearing.
Recipes sorts by: Fluid Chemical, Fluid Electrolysis, Assembly machine(or by hand), Chemical plant, Furnace, Chemical furnace, Electroliser, Mixing furnace... Electronic Part, Electronic Board, Gear, Bearing.
Screenshots from my game using bobplates v0.5.2:
These are the Electrolysers, I am currently producing too much oxygen, so replacing some of those Water Electrolysis stages with Salt Water Electrolysis stages might be a good idea. So far we're producing Sodium Hydroxide as an unwanted byproduct. This is a useful resource that would be used in the Aluminium chain.
The new gasses then go into the next part of the chain, to produce Hydrogen Chloride for the Tungsten process, while the oxygen goes to produce Nickel, and Zinc is tacked on the end because it uses the Sulfuric Acid byproduct, but that is also plumbed into the oil chain.
Then the Hydrogen Chloride is connected to my Tungsten chain to produce Tungstic Acid with a Calcium Chloride byproduct, then Tungsten Oxide, and finally Tungsten Powder. the Calcium Chloride byproduct would be used in the Titanium chain.
And then we go up to my Alloying chain. on the left we're using Tungsten Powder to produce Copper-Tungsten plates from Copper and Tungsten Powder and Tungsten plates from Nickel and Powdered Tungsten. we're also producing Brass, Bronze, Electrum, and Gold. The gold here requires Chlorine to smelt.
Not pictures is my production of Silver, Tin, which are both simply smelted, and Copper, Iron and Steel which are base game.
Readme wrote:This mod adds a method of turning the ores in bobores mod into plates ready for use, create intermediate products, plus buildings and chemcals to do the job.
Structures:
Electrolyser (Runs Electrolysis recepies)
Mixing furnace (Runs Smelting and Alloy recepies (Burner powered as of 0.5.4))
Chemical furnace (Runs Chemical Furnace recepies (Burner powered as of 0.5.4))
Electric Mixing furnace (Runs Smelting and Alloy recepies (Electric Furnace upgrade)) (Mixing Furnace MK2 before 0.5.4)
Electric Chemical furnace (Runs Smelting, Chemical Furnace and Alloy recepies (Electric Furnace upgrade)) (Chemical Furnace MK2 before 0.5.4)
Research:
Alloy processing 1 (A1) -> Bronze plate + Mixing Furnace
Chemical Processing 1 (C1) -> Chemical Furnace + Salt + Carbon
Electrolysis 1 (E1) (Req steel processing) -> Electrolyser + Hydrogen
Chemical processing 2 (req E2+C1) -> Chemical plant + Hydrogen Chloride + Calcium Chloride
Electrolysis 2 (req E1+C1) -> Salt water Electrolysis + Storage Tank
Alloy processing 2 (req A1 + advanced material processing 2) -> Electric Mixing Furnace
Chemical Processing 3 (req C2 + advanced material processing 2) -> Electric Chemical Furnace + Chemical Plant 2
Electrolysis 3 (req E2) -> Electrolyser 2
Alloy processing 3 (req A2) -> Electric Multi-purpose Furnace
Chemical Processing 4 (req C3 + oil processing + advanced material processing 2) -> Chemical Plant 3
Electrolysis 4 (req E3) -> Electrolyser 3
petroleum gas cracking to hydrogen added to advanced oil processing
Lead processing (req E1+C1) -> Lead oxide + Lead plate (v0.5.2)
Aluminium processing (Req E2) -> Alumina + Aluminium plate
Gold processing (req E2) -> Gold plate (v0.5.1)
Silicon Processing (req C2) -> Silicon plate
Titanium Processing (req C2) -> Titanium plate (C2 since v0.5.4, C3 before then)
Tungsten Processing (Req C2) -> Tungstic Acid + Tungsten Oxide + Powdered Tungsten + Copper-Tungsten plate + Tungsten plate (C2 since v0.5.4, C3 before then)
Nickel Processing (Req E1) -> Nickel Plate (v0.5.2)
Invar Processing (Req A1 + Nickel) -> Invar Plate (v0.5.3)
Nitinol Processing (Req A1 + Nickel + Titanium) -> Nitinol Plate (v0.5.3)
Zinc Processing (Req E1 + Sulfur Processing) -> Zinc Plate + Brass plate + Gun-metal plate(v0.5.4, was part of E2 before)
Electrum processing (req A2 + Gold processing) -> Electrum plate (v0.5.4)
These are the assumed molecular compositions of the ores:
Tin Ore: Cassiterite SnO2 (Tin Oxide)
Zinc Ore: Smithsonite ZnCO3 (Zinc Carbonate)
Lead Ore: Galena PbS (Lead Sulfide)
Nickel Ore: Galena NiS (Nickel Sulfide)
Tungsten ore: Scheelite CaWO4 (Calcium Tungstate)
Aluminium ore: Bauxite/Gibbsite Al(OH3) (Aluminium Hydroxide)
Titanium Ore: Rutile TiO2 (Titanium Oxide)
Smelting:
Tin Ore -> Tin plate
Lead Ore -> Lead plate
Silver Ore -> Silver plate
Quartz -> Glass
Resin -> Rubber
Chemical Smelting:
Water -> Salt
Tungsten Oxide WO3 + Hydrogen -> Powdered Tungsten
Gold ore + Chlorine -> Gold plate (V0.5.1)
Lead Ore + 1.5x Oxygen -> Lead Oxide + Sulfur Dioxide (gas) (v0.5.2)
2x Lead Oxide + Carbon -> 2x Lead Plate (v0.5.2)
Chemical:
Hydrogen + Chlorine -> Hydrogen Chloride (HCl)
Stone + Hydrogen Chloride -> Calcium Chloride CaCl2 (Solid)
Sulfur Dioxide + 2x Hydrogen = Sulfur (+ water, but not given) (v0.5.2)
Sulfur Dioxide + Water = Sulfuric Acid (v0.5.2)
Iron ore + Hydrogen Chloride x6 -> 5x Ferric Chloride Solution
Light Oil x2 -> Liquid Fuel
Coal + water -> Heavy oil
Heavy Oil 2x -> Resin
Coal + Water x0.5 -> Carbon x2
Sodium Hydroxide + Bauxite -> Alumina Al2O3 (Corundum/Aluminium Oxide)
Tungsten Ore + Hydrogen Chloride -> Tungstic Acid (H2WO4) + Calcium Chloride
Tungstic Acid + Hydrogen -> Tungsten Oxide (WO3) (releases water, water not given due to abundance of water)
Electrolysis:
Water -> Hydrogen + Oxygen (Oxygen added in v0.5.2)
Salt + Water -> Sodium Hydroxide (solid) + Chlorine (gas) + Hydrogen (gas)
Alumina + Carbon -> Aluminium plate
Calcium Chloride + Carbon + Rutile -> Titanium plate.
Zinc Ore + Sulfuric Acid -> Zinc plate.
Calcium Chloride + Carbon + Quartz -> Silicon plate.
Nickel Ore + Water + 1.5x Oxygen -> Nickel plate + Sulfuric Acid
Alloys:
Copper + Tin -> Bronze
Copper + Zinc -> Brass
Silver + Gold -> Electrum
Nickel + Powdered Tungsten -> Tungsten (V0.5.2)
Copper + Powdered Tungsten -> Copper-Tungsten
Tungsten Oxide + Carbon(coal) -> Tungsten Carbide (V0.5.1)
Powered Tungsten + Carbon(coal) -> Tungsten Carbide (V0.5.1) (takes twice as long to smelt as the other recipe)
Copper + Tin + Zinc -> Gunmetal (v0.5.2)
Nickel + Titanium -> Nitinol (v0.5.3)
Nickel + Iron -> Invar (v0.5.3)
Gears:
Steel Gear wheel = Steel Plate
Brass gear wheel = Brass Plate
Tungsten Gear Wheel = Tungsten Plate
Titanium Gear Wheel = Titanium Plate
Nitinol Gear wheel = Nitinol plate
Bearings:
Steel bearing ball x12 = Steel Plate
Titanium bearing ball x12 = Titanium Plate
Nitinol bearing ball x12 = Nitinol plate
Steel bearing x2 = Steel Plate + 16x Steel bearing ball
Titanium bearing x2 = Titanium Plate + 16x Titanium bearing ball
Nitinol bearing x2 = Nitinol plate + 16x Nitinol bearing ball
Parts:
Wooden Board x2 = Wood
Phenolic Board x2 = Wood + Resin
Fibreglass Board x2 = Glass + Plastic
copper wire x2 = copper plate
tinned copper wire x3 = 3x copper wire + tin plate
electric cable x2 = 2x tinned copper wire + rubber
solder x12 = 9x tin plate + silver plate + copper plate + resin (flux)
Circuit boards:
Basic circuit board = wooden board + 3x copper wire
circuit board = Phenolic board + copper plate + tin plate + Ferric Chloride Solution x0.5
superior circuit board = Fibreglass Board + copper plate + gold plate + Ferric Chloride Solution x0.5
Electronic components:
Basic Electronic Components x5 = tinned copper wire + carbon
Electronic Components x5 = plastic + tinned copper wire + silicon wafer x2
Intergrated Electronics x5 = Silicon wafer x4 + plastic + tinned copper wire + sulfuric Acid x0.5
Electronic Circuits:
Basic Electronic Circuit Board = Basic circuit board + Basic Electronic Components x5
Electronic Circuit Board = circuit board + Basic Electronic Components x4 + electronic components x4 + solder
Electronic Processing Board = Superior circuit board + Basic electronic components x2 + electronic components x4 + intergrated electronics x2 + solder