Game FPS at End game

[Malryn]

So I have reached a point where my base has gotten too large and my FPS has gotten to 10. I thought it was because of Mods I have been using but it appears not to the case.
Example: I have 27,000 active inserters running all the time. Those are mostly train drop off sorting, smelting, and circuit construction.
Is there any advice with optimizing my base to avoid major slow down in game performance?

[Koub]

You can replace belts by underground belts of the same type. It helps.

[Malryn]

You can replace belts by underground belts of the same type. It helps.

Thanks! So belts in numbers cause major performance drops? Would logistics robots do a better job performance than using a bus design?

[Rseding91]

If you keep building more eventually it slows. That's just how computers work - the more you ask them to do the longer it takes to do that

[Xterminator]

You can replace belts by underground belts of the same type. It helps.

Thanks! So belts in numbers cause major performance drops? Would logistics robots do a better job performance than using a bus design?

Yup, robots will help your performance compared to Belts. Belts cause quite a bit of performance drop when there are a lot of them because they have to constantly do collision checks and stuff. Bots on the other hand don't.

Few quick things though. I still wouldn't recommend using robots for super long distance transport of huge amounts of resources. And even though bots will impact performance less than Belts, they will still cause issues if you have massive numbers of them like in the many thousands. Below that though and it will definitely help to switch to bots wherever possible.

[Afforess]

Yup, robots will help your performance compared to Belts. Belts cause quite a bit of performance drop when there are a lot of them because they have to constantly do collision checks and stuff.

Fairly certain this is no longer true since 0.12. Items on belts are not entities, so there are no collision checks.

[Malryn]

If you keep building more eventually it slows. That's just how computers work - the more you ask them to do the longer it takes to do that

Of course . But the game engine never maxes out my resources on my PC. If my PC was maxing out in resources I would either upgrade my PC or overclock it. Correct me if I am wrong but is it the game engine not allowing to to just take all the resources available? I have read from others where they have run this game on a 5 year old PC and it performs just as well a brand new PC with all the latest and greatest. Their game starts to slow down without ever maxing out any resources.

Also, I am not trying to be negative with the game. I just pointing out behavior I am noticing. I absolutely LOVE this game. Since buying it on steam I am at 650 hours played and I dream of belts and inserters.

[orzelek]

If you keep building more eventually it slows. That's just how computers work - the more you ask them to do the longer it takes to do that

Of course . But the game engine never maxes out my resources on my PC. If my PC was maxing out in resources I would either upgrade my PC or overclock it. Correct me if I am wrong but is it the game engine not allowing to to just take all the resources available? I have read from others where they have run this game on a 5 year old PC and it performs just as well a brand new PC with all the latest and greatest. Their game starts to slow down without ever maxing out any resources.

Also, I am not trying to be negative with the game. I just pointing out behavior I am noticing. I absolutely LOVE this game. Since buying it on steam I am at 650 hours played and I dream of belts and inserters.

Game engine is mainly limited by performance of single CPU core since thats how simulation is done.
So overclocking should give you a benefit and you shouldn't expect game to max out your resources - it will max out one core.

[Koub]

Yup, robots will help your performance compared to Belts. Belts cause quite a bit of performance drop when there are a lot of them because they have to constantly do collision checks and stuff.

Fairly certain this is no longer true since 0.12. Items on belts are not entities, so there are no collision checks.

viewtopic.php?f=5&t=17782
This test was done with 0.12.17. I don't remember major changes in the core belt mechanics since then.

[Malryn]

If you keep building more eventually it slows. That's just how computers work - the more you ask them to do the longer it takes to do that

Of course . But the game engine never maxes out my resources on my PC. If my PC was maxing out in resources I would either upgrade my PC or overclock it. Correct me if I am wrong but is it the game engine not allowing to to just take all the resources available? I have read from others where they have run this game on a 5 year old PC and it performs just as well a brand new PC with all the latest and greatest. Their game starts to slow down without ever maxing out any resources.

Also, I am not trying to be negative with the game. I just pointing out behavior I am noticing. I absolutely LOVE this game. Since buying it on steam I am at 650 hours played and I dream of belts and inserters.

Game engine is mainly limited by performance of single CPU core since thats how simulation is done.
So overclocking should give you a benefit and you shouldn't expect game to max out your resources - it will max out one core.

I just triple checked Resource Monitor on Facotorio running at 10 fps and cores 0-7 on my PC and none are hitting 99% usage. When I changed my the PID's affinity to a specific core it is at 100%. If i gave it only two courses it used 80% of core 7 and about 40% of core 6. So I think the game is multithreading. Just read this post by a dev (viewtopic.php?f=5&t=4900&p=37918&hilit=Threads#p37918) about things and from what I got from this is that game updates is single thread but most everything else part of the using different cores. This makes sense in what I am seeing but I would still think I would see a single core at near 100% if the game is being limited by a resource limitation even if the game is operating as a single threading process.

[againey]

I just triple checked Resource Monitor on Facotorio running at 10 fps and cores 0-7 on my PC and none are hitting 99% usage. When I changed my the PID's affinity to a specific core it is at 100%. If i gave it only two courses it used 80% of core 7 and about 40% of core 6. So I think the game is multithreading. Just read this post by a dev (viewtopic.php?f=5&t=4900&p=37918&hilit=Threads#p37918) about things and from what I got from this is that game updates is single thread but most everything else part of the using different cores. This makes sense in what I am seeing but I would still think I would see a single core at near 100% if the game is being limited by a resource limitation even if the game is operating as a single threading process.

Modern operating systems like to bounce a single process around different cores so that no single core experiences the bulk of the processing. This spreads out the heat generated on the physical chip, reducing stress on the chip, reducing likelihood of data errors and crashes (akin to what happens when someone overclocks their computer too far), and reducing the chip's need to defensively lower its clock speed in order to keep its temperature manageable.

So you'll often see a single-threaded program using 25% per core on a 4-core system. Since it is single-threaded, it can't run the program on multiple cores simultaneously, but it will run it on the first core for a few milliseconds, then on the second core for a few milliseconds, and so on. The utilization of the cores should still add up to 100%. Anything over 100% in this scenario could be small bits of multi-threaded capability from the program (such as handling network communications or audio processing), ineffectual attempts at multi-threading (it uses more than a single core's worth of processing, but all that extra work is wasted coordinating among the multiple threads), or other programs also running independently on those cores (I don't think setting affinity forces other processes off that core, just restricts that process to that core).

[Malryn]

I just triple checked Resource Monitor on Facotorio running at 10 fps and cores 0-7 on my PC and none are hitting 99% usage. When I changed my the PID's affinity to a specific core it is at 100%. If i gave it only two courses it used 80% of core 7 and about 40% of core 6. So I think the game is multithreading. Just read this post by a dev (viewtopic.php?f=5&t=4900&p=37918&hilit=Threads#p37918) about things and from what I got from this is that game updates is single thread but most everything else part of the using different cores. This makes sense in what I am seeing but I would still think I would see a single core at near 100% if the game is being limited by a resource limitation even if the game is operating as a single threading process.

Modern operating systems like to bounce a single process around different cores so that no single core experiences the bulk of the processing. This spreads out the heat generated on the physical chip, reducing stress on the chip, reducing likelihood of data errors and crashes (akin to what happens when someone overclocks their computer too far), and reducing the chip's need to defensively lower its clock speed in order to keep its temperature manageable.

So you'll often see a single-threaded program using 25% per core on a 4-core system. Since it is single-threaded, it can't run the program on multiple cores simultaneously, but it will run it on the first core for a few milliseconds, then on the second core for a few milliseconds, and so on. The utilization of the cores should still add up to 100%. Anything over 100% in this scenario could be small bits of multi-threaded capability from the program (such as handling network communications or audio processing), ineffectual attempts at multi-threading (it uses more than a single core's worth of processing, but all that extra work is wasted coordinating among the multiple threads), or other programs also running independently on those cores (I don't think setting affinity forces other processes off that core, just restricts that process to that core).

If it is jumping between cores it should still show a CPU spike at 100% in the core it was working at at that time if it was the CPU resource limit. What am I missing in this? Here is a screenshot of the cores with the game running with a Mega base at 10 fps.

I really should get this game running on a Linux box so I can do better troubleshooting -.-

[prg]

The thread might get migrated around every few milliseconds while a pixel in that image spans maybe a whole second so the peaks get averaged out.

[Frightning]

^That:

You won't see the spikes in taskmanager because they are too brief (read: few milliseconds). It will get averaged over the 'tick-rate' that task manager's graphs use. Hence the net load summing to 100%+ but no 1 core being pegged to max.

[Malryn]

Well I guess I need to find some kind of data that shows this to be the case before I go out and upgrade my system but is there any way for me to have a high output factory without having this lag? Can I spread the factories out or anything? Like placing all smelting operations on the other side of the map, circuits in a corner some place else?

[Killavirus]

Or goto suggestions ; WE WANT MULTITHREADING

Careful you don't get hit by chairs and bottles thrown by the devs !!!

[Rseding91]

Or goto suggestions ; WE WANT MULTITHREADING

Careful you don't get hit by chairs and bottles thrown by the devs !!!

Got it! We'll spawn threads and have them eat 100% of the cpu so it looks like it's using all of the computer's processor.

[Malryn]

Or goto suggestions ; WE WANT MULTITHREADING

Careful you don't get hit by chairs and bottles thrown by the devs !!!

Got it! We'll spawn threads and have them eat 100% of the cpu so it looks like it's using all of the computer's processor.

Well the direction technology has gone in the last decade is not faster cores but more cores. Its unfortunate but that is the direction intel has gone. I think that is the only way to get more computation work from a computer.

[AutoMcD]

there will be another breakthrough that increases speed, just makes more sense to go out instead of up at the moment.

[Malryn]

there will be another breakthrough that increases speed, just makes more sense to go out instead of up at the moment.

Heck to the no. There is people out there.

Just started to overclock my PC to see if I can get a boost in performance. Kind of wondering if steam engines / nuclear power mod would have less work on a PC than a bunch of accumulators and solar plants.