That would be awesome! Thank you Bob! =)bobingabout wrote: ↑Wed Apr 07, 2021 3:37 pmit seems you're right. I'll try and change that in the newer version that it can effect the belt speed even if the belt overhaul is turned off.
[1.1] Bob's Mods: General Discussion
Moderator: bobingabout
Re: [1.1] Bob's Mods: General Discussion
Re: [1.1] Bob's Mods: General Discussion
any reason that adding bobwarfare makes the science so much more complicated?
Re: [1.1] Bob's Mods: General Discussion
Doesn't bobwarfare just build off bobenemies and make all the military technologies based on alien orbs?
Re: [1.1] Bob's Mods: General Discussion
it adds radar tiers up to level 5 and the satellite recipe is changed to require this so there's a lot more complexity - something like 150 more buildings required to build the satellites.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [1.1] Bob's Mods: General Discussion
Mostly because it was requested.
"Launching a rocket is an end-game thing, it should require end-game Bob materials"
If Warfare is the only of my mods you have, it doesn't make as much sense as if you're running the whole Bobs suite.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [1.1] Bob's Mods: General Discussion
The 1.1.3 update run.
Updates
Re: [1.1] Bob's Mods: General Discussion
Thanks for the smart belt building support
Re: [1.1] Bob's Mods: General Discussion
Thank you!!
Re: [1.1] Bob's Mods: General Discussion
Do aliens require a specific evolution level before they can spawn enemies able to drop colored artifacts?
I tend to slow down alien ability to spawn new bases by a large margin so they simply may not have spawned yet but in my previous playthroughs (few years ago) I was under the impression that elemental spawners could be generated from the very beginning.
I tend to slow down alien ability to spawn new bases by a large margin so they simply may not have spawned yet but in my previous playthroughs (few years ago) I was under the impression that elemental spawners could be generated from the very beginning.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [1.1] Bob's Mods: General Discussion
All enemies drop artifacts.Huillam wrote: ↑Fri Apr 16, 2021 11:08 am Do aliens require a specific evolution level before they can spawn enemies able to drop colored artifacts?
I tend to slow down alien ability to spawn new bases by a large margin so they simply may not have spawned yet but in my previous playthroughs (few years ago) I was under the impression that elemental spawners could be generated from the very beginning.
Before "Big" enemies though, they only have a chance to drop small artifacts, so, you might need to kill a few before they show up.
I'd advise you to check settings, and make sure enemies dropping artifacts is turned on in the enemies mod section of the settings.
Re: [1.1] Bob's Mods: General Discussion
Of course right after I asked I spotted an elemental spawner in radar range, went to check and got myself some colored alien artifacts. My usual (lack of) luck.
Everything works fine then. Sorry.
Everything works fine then. Sorry.
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [1.1] Bob's Mods: General Discussion
Oh, right, maybe I'm still half asleep.
if you specifically want the coloured artifacts, you need to either travel some distance, as they start showing up after a certain distance, or your evolution factor to... 0.5 to make the elemental nests appear, or to 0.6 to make the lowest level elemental enemies spawn.
turning on the "Bigger sooner" option lowers all these values by 0.1.
Re: [1.1] Bob's Mods: General Discussion
Good day idea compatible in Space Exploration in ..bobingabout wrote: ↑Fri Apr 16, 2021 11:50 amOh, right, maybe I'm still half asleep.
if you specifically want the coloured artifacts, you need to either travel some distance, as they start showing up after a certain distance, or your evolution factor to... 0.5 to make the elemental nests appear, or to 0.6 to make the lowest level elemental enemies spawn.
turning on the "Bigger sooner" option lowers all these values by 0.1.
i am help in integrate test you!
Re: [1.1] Bob's Mods: General Discussion
Hey guys! Brand new user and was hoping for some insight.
I had been wanting a few new extras in my current playthrough so I downloaded a slew of bob's mod's after seeing there was a huge selection of additional early, mid, and end game content. I downloaded a few and was pretty excited until I realized that my factory was needing some overhauling and updating, no problem there!
The biggest issue I found is most of these new items and technologies are all requiring the new ores /chemicals/etc introduced with bob's mods which I'm not seeing anything pop up in my save file as it was a Vanilla world. I.E. Can't find deposits of cobalt, brass, etc.
I tried poking around with a few other mods seeing if they're let me add the required resources in real time but haven't had any luck.
I guess my ask is: Is there any work around for installing these mods on a game file/world that was vanilla or am I going to just need to uninstall them from that save and then start fresh to get the full experience Bob's Mods have to offer?
Thanks!
-Ja
I had been wanting a few new extras in my current playthrough so I downloaded a slew of bob's mod's after seeing there was a huge selection of additional early, mid, and end game content. I downloaded a few and was pretty excited until I realized that my factory was needing some overhauling and updating, no problem there!
The biggest issue I found is most of these new items and technologies are all requiring the new ores /chemicals/etc introduced with bob's mods which I'm not seeing anything pop up in my save file as it was a Vanilla world. I.E. Can't find deposits of cobalt, brass, etc.
I tried poking around with a few other mods seeing if they're let me add the required resources in real time but haven't had any luck.
I guess my ask is: Is there any work around for installing these mods on a game file/world that was vanilla or am I going to just need to uninstall them from that save and then start fresh to get the full experience Bob's Mods have to offer?
Thanks!
-Ja
Re: [1.1] Bob's Mods: General Discussion
From what i expect, the new ore will be generated only on newly revealed area now that the mod is installed.ja_feels wrote: ↑Sun Nov 21, 2021 8:38 am The biggest issue I found is most of these new items and technologies are all requiring the new ores /chemicals/etc introduced with bob's mods which I'm not seeing anything pop up in my save file as it was a Vanilla world. I.E. Can't find deposits of cobalt, brass, etc.
Now cobalt and brass i'm not sure you will have deposit. Brass being an alloy, you will need to mix other ore to get some. Cobalt i'm not sure because things changes but in my memory it was possible to get some when refining copper ore.
Now you could still cheat to add nickel, lead, bauxite, zinc and so on in the already revealed area using the command /editor and then editing the map ( which disable achievement).
but all things considered i would still recommend starting a fresh game with the mods on, since they are quite a significant overhaul and can change the way you build from the start, that would give the full experience .
maybe it requires a bit of time/testing to find the most suitable combinaison of mods in the list for your game, getting a sneak peak at future technologies may help making a choice
Re: [1.1] Bob's Mods: General Discussion
I figured this would be the case, thanks for the info I greatly appreciate it!but all things considered i would still recommend starting a fresh game with the mods on, since they are quite a significant overhaul and can change the way you build from the start, that would give the full experience .
maybe it requires a bit of time/testing to find the most suitable combinaison of mods in the list for your game, getting a sneak peak at future technologies may help making a choice
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [1.1] Bob's Mods: General Discussion
It's already been said, but:ja_feels wrote: ↑Mon Nov 22, 2021 4:26 amI figured this would be the case, thanks for the info I greatly appreciate it!but all things considered i would still recommend starting a fresh game with the mods on, since they are quite a significant overhaul and can change the way you build from the start, that would give the full experience .
maybe it requires a bit of time/testing to find the most suitable combinaison of mods in the list for your game, getting a sneak peak at future technologies may help making a choice
1. make sure you have bobores installed.
2. Cobalt and Sulfur will require the option to be turned on if you want the ore, but Sulfur comes from a lot of places, and Cobalt can be extracted from Copper ore once you research Cobalt Processing.
3. The ores will appear if you explore, but if you want to force them to show up you can use the commands /c remote.call("bobores", "Regenerate") to respawn all bob ores, or /c game.regenerate_entity("tin-ore") to respawn a specific ore (if you know it's internal code name)
Re: [1.1] Bob's Mods: General Discussion
Steam powered assembling machine
by what formula is the crafting speed calculated for different temperatures?
165С - crafting speed=0.4
315С - crafting speed ?
...
by what formula is the crafting speed calculated for different temperatures?
165С - crafting speed=0.4
315С - crafting speed ?
...
- bobingabout
- Smart Inserter
- Posts: 7352
- Joined: Fri May 09, 2014 1:01 pm
- Contact:
Re: [1.1] Bob's Mods: General Discussion
It's liniar.
T1 steam, 165C is 0.4
T2 steam, 315C is 0.8
T3 is 1.2
T4 is 1.6
T5 is 2.0
Re: [1.1] Bob's Mods: General Discussion
I am trying to modify the amount of power generated by the nuclear machines in the power mod. I've managed to set the reactors and exchangers to my desired values, but the turbines seem to be capped at 11.82 MW because the maximum temperature they seem to be able to handle is 1000C:
0.2 KW * 60 * 1 * (1000-15) = 11820 KW.
My desired output from a turbine is 25 MW which is achievable at 2099C:
0.2 KW * 60 * 1 * (2099-15) = 25008 KW
Setting the maximum temperature for both reactors and exchangers to 2099C causes no issues as far as I can tell. The UI tooltip informs me that the maximum temperature of the turbine is 2099C, but the maximum output remains 11.82MW. Is there some way to increase this hidden maximum temperature so that I can get a higher power output?
0.2 KW * 60 * 1 * (1000-15) = 11820 KW.
My desired output from a turbine is 25 MW which is achievable at 2099C:
0.2 KW * 60 * 1 * (2099-15) = 25008 KW
Setting the maximum temperature for both reactors and exchangers to 2099C causes no issues as far as I can tell. The UI tooltip informs me that the maximum temperature of the turbine is 2099C, but the maximum output remains 11.82MW. Is there some way to increase this hidden maximum temperature so that I can get a higher power output?